RGB2HDMI EXTENDED ADAPTER FOR AMIGA 500 / 500PLUS
RGB to HDMI - RGB2HDMI extended adapter for the Commodore Amiga 500 / 500Plus
You can now connect a HDMI TV/Monitor to your Amiga 500 / 500Plus
This adapter has been designed by LinuxJedi https://linuxjedi.co.uk/2021/04/11/design-of-the-amiga-500-cpld-rgbtohdmi/) and is based on the OpenSource RGB2HDMI project by c0pperdragon & hoglet67.
A Raspberry Pi Zero is used to display a pixel perfect image and it can be softened or scanlines can be added. Due to the completely different way the pixel clock is derived (using the RGB and sync instead of the Amiga’s clocks) there are no sparkling pixels.
This version of the board allows connecting additional turbo boards e.g. TF534 or TF536. It does not colide with them.
What you will get:
1x RGB2HDMI adapter
1x HDMI ribbon cable
1x A cable with a switch
1x Detailed instruction manual with pictures
Please note:
- This adapter has been designed by LinuxJedi (https://linuxjedi.co.uk/2021/04/11/design-of-the-amiga-500-cpld-rgbtohdmi/)
- Raspberry Pi Zero and an SD card are required - these are NOT INCLUDED in the sale
- No soldering is required (some very early Amiga 500 rev 3 motherboard might require soldering to provide the necessary sync signals)
- Instruction manual will be provided after purchase
- We are NOT responsible for your mistakes during installation. All boards have been tested before postage.
You can now connect a HDMI TV/Monitor to your Amiga 500 / 500Plus
This adapter has been designed by LinuxJedi https://linuxjedi.co.uk/2021/04/11/design-of-the-amiga-500-cpld-rgbtohdmi/) and is based on the OpenSource RGB2HDMI project by c0pperdragon & hoglet67.
A Raspberry Pi Zero is used to display a pixel perfect image and it can be softened or scanlines can be added. Due to the completely different way the pixel clock is derived (using the RGB and sync instead of the Amiga’s clocks) there are no sparkling pixels.
This version of the board allows connecting additional turbo boards e.g. TF534 or TF536. It does not colide with them.
What you will get:
1x RGB2HDMI adapter
1x HDMI ribbon cable
1x A cable with a switch
1x Detailed instruction manual with pictures
Please note:
- This adapter has been designed by LinuxJedi (https://linuxjedi.co.uk/2021/04/11/design-of-the-amiga-500-cpld-rgbtohdmi/)
- Raspberry Pi Zero and an SD card are required - these are NOT INCLUDED in the sale
- No soldering is required (some very early Amiga 500 rev 3 motherboard might require soldering to provide the necessary sync signals)
- Instruction manual will be provided after purchase
- We are NOT responsible for your mistakes during installation. All boards have been tested before postage.