AMSTRAD CPC 6128 - 3D PRINTED MOUNT / OLED DISPLAY / FLASH FLOPPY
Gotek Drive is a perfect replacement for Amstrad CPC 6128 & ZX Spectrum 128 +3 original floppy drives.
Plug & play solution with a 3D printed bracket, white OLED display and a Flash Floppy 3.42 firmware already installed.
USB stick (NOT INCLUDED) is needed to put *.DSK files.
Just copy the *.DSK files to the root of your USB drive and enjoy working in the NATIVE mode.
What you will get:
1x Gotek Drive with 3D printed mount & OLED display
1x 34 pin Gotek connector to 26 pin Amstrad CPC 6128 & Spectrum +3 Floppy connector
1x power cable prepared for Amstrad CPC 6128 & Spectrum +3
PLEASE NOTE:
- For correct fitting & connecting see the pictures
- I am not responsible for your mistakes during installation
- If you have any doubts, please ask
- More information about Flash Floppy can be found here:
https://github.com/keirf/FlashFloppy/wiki/Initial-Setup
Plug & play solution with a 3D printed bracket, white OLED display and a Flash Floppy 3.42 firmware already installed.
USB stick (NOT INCLUDED) is needed to put *.DSK files.
Just copy the *.DSK files to the root of your USB drive and enjoy working in the NATIVE mode.
What you will get:
1x Gotek Drive with 3D printed mount & OLED display
1x 34 pin Gotek connector to 26 pin Amstrad CPC 6128 & Spectrum +3 Floppy connector
1x power cable prepared for Amstrad CPC 6128 & Spectrum +3
PLEASE NOTE:
- For correct fitting & connecting see the pictures
- I am not responsible for your mistakes during installation
- If you have any doubts, please ask
- More information about Flash Floppy can be found here:
https://github.com/keirf/FlashFloppy/wiki/Initial-Setup